From fbf4af0fe73a8da8fc8924ea7466d85331b9fb46 Mon Sep 17 00:00:00 2001
From: Luca Tringali <tringalinvent@libero.it>
Date: Wed, 23 Jan 2019 15:39:48 +0100
Subject: Comments and README

---
 README.md    | 12 ++++++++++++
 autologin.sh | 12 ++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 README.md
 mode change 100644 => 100755 autologin.sh

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..3e9a47f
--- /dev/null
+++ b/README.md
@@ -0,0 +1,12 @@
+# RaspberryPi Thermostat
+This is a simple thermostat application built for Python3 on a RaspberryPi with PySide2, to demonstrate how easy is to use PySide2 to build your domotic devices.
+If you're using the Raspbian Buster with PySide2 image provided by codice-sorgente.it (https://www.codice-sorgente.it/raspbian-buster-pyside2-lxqt/#English) you should only need to clone this repository and run the autologin script:
+cd /home/pi
+git clone https://codice-sorgente.it/cgit/termostato-raspberry.git/
+cd termostato-raspberry
+chmod +x autologin.sh
+./autologin.sh
+Then just reboot the system and wait for the interface to load. If you are using a Raspbian Buster image, without PySide2 libraries, you'll first need to follow instructions on the page https://www.codice-sorgente.it/raspbian-buster-pyside2-lxqt/#English, to install Qt5 and PySide2.
+You also need to install libraries for GPIO pins and the therm sensors:
+sudo aptitude install python3-rpi.gpio
+sudo pip3 install w1thermsensor
diff --git a/autologin.sh b/autologin.sh
old mode 100644
new mode 100755
index f7135b3..ce265e7
--- a/autologin.sh
+++ b/autologin.sh
@@ -1,4 +1,7 @@
 #!/bin/bash
+#Created by Luca Tringali - www.codice-sorgente.it
+#Thanks to Dalen, this code is based on his answer: https://stackoverflow.com/questions/44186905/how-to-replace-the-desktop-interface-with-a-python-application
+
 username="pi"
 cat <<EOF > /etc/systemd/system/tty1.service
 [Service]
@@ -41,9 +44,18 @@ sleep 1
 /usr/bin/python3 /home/$username/termostato-raspberry/termostato.py
 EOF
 chmod +x /home/$username/appstart
+chmod +x /home/$username/termostato-raspberry/termostato.py
 chown $username:$username /home/$username/appstart
 
+#This thermostat app also needs the following libraries:
+sudo apt-get update
+sudo aptitude install python3-rpi.gpio
+sudo pip3 install w1thermsensor
+
+#Disable old autologins, give user access to tty
 sudo systemctl disable sddm.service
+sudo systemctl disable getty.target
+sudo systemctl disable getty@tty1.service
 sudo usermod -a -G tty $username
 sudo usermod -a -G video $username
 
-- 
cgit v1.1