From fbf4af0fe73a8da8fc8924ea7466d85331b9fb46 Mon Sep 17 00:00:00 2001 From: Luca Tringali Date: Wed, 23 Jan 2019 15:39:48 +0100 Subject: Comments and README --- README.md | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..3e9a47f --- /dev/null +++ b/README.md @@ -0,0 +1,12 @@ +# RaspberryPi Thermostat +This is a simple thermostat application built for Python3 on a RaspberryPi with PySide2, to demonstrate how easy is to use PySide2 to build your domotic devices. +If you're using the Raspbian Buster with PySide2 image provided by codice-sorgente.it (https://www.codice-sorgente.it/raspbian-buster-pyside2-lxqt/#English) you should only need to clone this repository and run the autologin script: +cd /home/pi +git clone https://codice-sorgente.it/cgit/termostato-raspberry.git/ +cd termostato-raspberry +chmod +x autologin.sh +./autologin.sh +Then just reboot the system and wait for the interface to load. If you are using a Raspbian Buster image, without PySide2 libraries, you'll first need to follow instructions on the page https://www.codice-sorgente.it/raspbian-buster-pyside2-lxqt/#English, to install Qt5 and PySide2. +You also need to install libraries for GPIO pins and the therm sensors: +sudo aptitude install python3-rpi.gpio +sudo pip3 install w1thermsensor -- cgit v1.1